View NCN60010610_1121357.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Complete Solutions
ON Semiconductor provides a complete set of contact interfaces, with outstanding features such as: * Compatibility with the latest ISO7816, EMV 4.1, and wireless standards * Full bridge DC-DC power supply which offers conversion efficiency in excess of 75% with great noise and ripple reject * Parallel or serial control port * Programmable clock division ratio * Large output current * Card detect * Chip select * Ability to read Type C (1.8 V) SIM/SAM and Smartcards
Smartcard Interface ICs
NCN6001
VCC 50 k INT 2 INTERRUPT BLOCK PROGRAMMABLE CARD DETECTION 500 k VCC CS 8 DUAL 8-BIT SHIFT REGISTER 3 States ADDRESS DECODING DC/DC CONVERTER b7 b6 b5 b4 b3 b2 b1 b0 b0 b1 9 VCC 18 CRD_DET
* Single SAM Interface (Security Access Module) & Smart Card Interface * 2.7V-5.5V Input Voltage * Fully compatible with ISO7816-3, EMV4.1 (May 2004), and GSM11.11 * Supports 1.8V/3V/5V Cards * Full-bridge Buck-Boost DC-DC converter; eliminates the need for multiple power supplies * High Efficiency DC-DC Converter * Programmable Card Voltage, Supply Card Detection, and Clock Interface * Three I/O Lines (I/O,C4 and C8) for Synchronous and Asynchronous Cards * Supports 20 MHz Card Clock Frequency * Chip Select Logic * 8KV HBM ESD Protection on card pins * TSSOP20 Package
MISO
7
10 Lout_L 12 Lout_H 13 CRD_VCC 11 PWR_GND GND
MOSI
4
CLK_SPI
5
b7
b6
b5 ISO7816 SEQUENCER
LOGIC CONTROL b3 b2
b4
CARD PINS DRIVER
15 C4/S0 14 C8/S1 19 CRD_RST 17 CRD_CLK 20 CRD_IO 20 k
CLK_IN EN_RPU
3 6
CLOCK DIVIDER
I/O GROUND
1 16 GND
20 k
CRD_VCC
Page
Smartcard Interface IC Solutions
SIM/SAM Card Interface ICs
NCN4555/7
* Single & Dual SIM interface (Subscriber Identity Module) * Sequencer on NCN4557 * 1.8 V - 5.5 V Digital Input Voltage * Fully compatible with ISO7816-3, GSM11.11/11.12/11.18, IMT-2000 / 3G TS 31.101 * Supports 1.8 V / 3 V Cards * Linear DC-DC Converter (LDO) able to supply current in excess of 50 mA at 1.8 V & 3 V (Vbat ranging from 2.7 V to 5.5 V) * Very low stand-by and operating power consumption * >5 MHz clock frequency * >7 kV HBM ESD protection on SIM pins * Low profile 3 mm x 3 mm QFN-16 package
VBAT 3
NCN4555 Demo Board
SIM Interface Device Comparison
Product Features Analog Interfaces Card Types (V) Max Clock Frequency (MHz) Power Supply (Type) Power Supply (V) Activation/Deactivation Packaging Tempetarure Range (C) Wireless Protocol ESD Protection (kV) NCN4555 1 card 1.8/ >5 Built-In LDO-Type DC-DC .7 - 5.5 No Low Profile QFN-16 -5 to +85 GSM 11.1x/G TS 1.101 8 NCN4557 cards 1.8/ >5 Built-In LDO-Type DC-DC .7 - 5.5 Yes Low Profile QFN-16 -5 to +85 GSM 11.1x/G TS 1.101 8
CRD_VCCB 1
LDO B > 50 mA 1.8 V/3.0 V/Enable CRD_VCCB
LDO A > 50 mA 1.8 V/3.0 V/Enable CRD_VCCA
4 CRD_VCCA
CRD_CLKB 16
En
En
5 CRD_CLKA
CRD_RSTB 15
En
En
6 CRD_RSTA
CRD_I/OB 14 14 k CRD_VCCB CLK 10 RST 9
I/O DATA DATA I/O En
I/O DATA DATA I/O En 7 CRD_I/OA 14 k
CRD_VCCA CONTROL LOGIC MUX 13 ENABLE 12 SEL0 11 SEL1 17 GROUND GND
I/O 8 18 k VDD VDD 2
SEQUENCING
Smartcard Interface ICs from ON Semiconductor
Features Analog Interfaces Card Types (V) Protocol Max Clock Frequency (MHz) Power Supply (Type) Power Supply (V) Host Interface Packaging Temperature Range (C) EMV Compliance ESD Protection (kV) NCN6000 1 Card 3/5 Asynchronous 20 Built-In DC-DC Converter 2.7 - 6 Parallel TSSOP-20 -25 to +85 4.1 8 NCN6001 1 Card 1.8/3/5 Asynchronous/Synchronous 20 High Efficiency DC-DC Converter 2.7 - 5.5 Serial (SPI) TSSOP-20 -25 to +85 4.1 8 NCN6004A 2 Cards 1.8/3/5 Asynchronous/Synchronous 20 High Efficiency DC-DC Converter 2.7 - 5.5 Parallel TQFP-48 -25 to +85 4.1 8
ON Semiconductor
Page
Customer Support
ON Semiconductor provides a very comprehensive demo board for the NCN6001 device, allowing customers to evaluate the part in a real, working environment. The demo board is part of a package that includes user-friendly interface software and user's manual. The MPU code used in this application is also provided.
NCN6001 Demo Board and Visual Basic Based Software Interface
NCN4557 Demo Board
ON Semiconductor also offers demo boards for the SIM interfaces. They allow customers to fully evaluate the NCN6010, NCN4555 and NCN4557. These evaluation boards have been designed to easily interface with the customers' systems.
For additional information and pricing, or to order demo boards or sample devices, please visit our website at www.onsemi.com.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: LiteratureDistributionCenterforONSemiconductor P.O.Box5163,Denver,Colorado80217USA Phone:303-675-2175or800-344-3860TollFreeUSA/Canada Fax:303-675-2176or800-344-3867TollFreeUSA/Canada Email:orderlit@onsemi.com
BRD8048-1 PRINTED IN USA 10/06 IRONWOOD XXXX 3K
N. American Technical Support:800-282-9855TollFree USA/Canada. Europe, Middle East and Africa Technical Support: Phone:421337902910 Japan Customer Focus Center Phone:81-3-5773-3850
ON Semiconductor Website:www.onsemi.com Order Literature:http://www.onsemi.com/orderlit Foradditionalinformation,pleasecontactyourlocal SalesRepresentative
BRD8048/D

▲Up To Search▲

Price & Availability of NCN60010610

	To Download NCN60010610 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .